Software Environment:
PlatformThe family of the operating system like Android, iOS, Windows Phone/Mobile, Palm OS, etc. Android
Operating SystemPre-installed (usually embedded) operating system which the device was released with. Huawei HarmonyOS 3.1Huawei HarmonyOS 3.1
Software ExtrasNavigation software, voice recognition, face recognition, personal assistant app, etc. Voice Command , Navigation softwarepre-installed , Intelligent personal assistantLearning personal assistant based on artificial intelligence (AI) , Face RecognitionFace identification by built-in camera

Application processor, ChipsetApplication processor, Chipset:
CPU ClockFrequency of the square signal which schedules the internal operation of microprocessor (synchronous sequential logic). The current consumed by the processor is approximately proportional to clock rate. 2400 MHz
CPUManufacturer part number and most important characteristics of the IC which includes the main application processor or processors Qualcomm Snapdragon 7 Gen 1 5G SM7450-AB, 2022, 64 bit, octa-core, 3072 Kbyte L2, 4 nm, Qualcomm Adreno 644 GPUQualcomm Snapdragon 7 Gen 1 5G SM7450-AB, 2022, 64 bit, octa-core, 3072 Kbyte L2, 4 nm, Qualcomm Adreno 644 GPU

Operative MemoryOperative Memory:
RAM TypeType of volatile memory IC which specifies RAM architecture, timing characteristics, refresh mode, voltage levels and physical design of the IC. Two major types of random-access memory is static RAM (SRAM) periodically refreshed dynamic RAM (DRAM). LPDDR4x SDRAM
RAM Capacity (converted)RAM capacity in binary bytes (KiB: 1024 bytes, MiB: 1024 KiB, GiB: 1024 MiB) 6 GiB RAM

Non-volatile MemoryNon-volatile Memory:
Non-volatile Memory InterfaceInterface (e.g. UFS 2.0, eMMC 5.1, moviNAND) which determines physical layer (width, clock rate, lanes, protocol) of data transfer between the application processor and the NV memory UFS 2.2Released in Aug, 2020, UFS 2.2 defines single-lane 600 MB/s or dual-lane 1.2 GB/s NAND flash EEPROM interface. Introduces a feature called WriteBooster
Non-volatile Memory Capacity (converted)The value of ROM capacity converted to the most appropriate units (KiB: 1024 bytes, KB: 1000 bytes, MiB: 1024 KiB, MB: 1000 KB, GiB: 1024 MiB, GB: 1000 MB) 128 GB ROM

DisplayDisplayAll parameters that related to display
Display DiagonalThe distance measured between the furthest corners of the display. In case of display with rounded edges this refers to the diagonal of the smallest bounding rectangle. 292 mm
11.5 inchDisplay Diagonal in inches
ResolutionHorizontal and vertical resolution of the primary display. In case of display with rounded edges this refers to the smallest bounding rectangle. 2200x1440
Horizontal Full Bezel WidthDefined as the sum of width of left and right vertical display bezels. If the display panel is located in the middle width of left and right bezels are the same and their width is the half of the full bezel width. 16.56 mm
Display Area UtilizationRegular display area per regular front panel area ratio. This approximated indicator does not count with possible rounded corners (neither on front panel nor on display) or display notches, holes. 84.7%
Pixel DensityIndicates the number of pixels per inch 229 PPI
Display TypeDisplay technology, e.g. Color/ monochrome e-ink, STN, PM-OLED, AM-OLED, TN-TFT, IPS TFT, ASV TFT, MVA TFT, PVA TFT, PLS TFT Color IPS TFT LCDColor IPS-TFT (In-Plane Switching - Thin Film Transistor) is also called Super TFT LCD. This is an active matrix LCD technology developed by Hitachi Ltd. in 1996. display
Number of Display ScalesMaximal number of displayable colors or scales 16.8M
Display Refresh RateFrame refresh frequency of the main display 120 Hz
Scratch Resistant ScreenUsual types: Gorilla Glass generations, DragonTrail/X, Sapphire Glass Yes
Graphical Subsystem:
Graphical ControllerManufacturer and part number of the graphics controller IC or commercial name of the intellectual property (IP) if the graphics controller is the part of a chipset Qualcomm Adreno 644
GPU Clock: 443 MHz

Audio/Video InterfacesAudio/Video Interfaces:
A/V OutAudio/Video outputs form a heterogeneous group of interfaces that allow the user to connect the device to various external analog/digital multimedia devices (monitors, projectors, HD TVs) and play multimedia content. For example: MHL, DisplayPort, HDMI, e No

Audio SubsystemAudio Subsystem:
Microphone(s)Analog or digital sound receiver. Main applications: voice calls, active noise cancellation, voice command, voice/video recording, voice identification stereo
Loudspeaker(s): 44.0 Surround sound or four microphones for noise cancellation
Audio Output: USB Type-C

Cellular PhoneCellular Phone:
Supported Cellular BandsList of supported cellular networks with band names. For example GSM900 refers to the GSM system with the 890-915 MHz uplink and 935-960 downlink bands. No

Secondary Cellular PhoneSecondary Cellular Phone:
Sec. Supported Cellular Networks: No

Control PeripheralsControl Peripherals:
Touchscreen TypeDetermines how the touchscreen module senses the touch of the screen Capacitive multi-touch screen
KeyboardConventional input peripheral which allows the user to enter characters by pressing a dedicated key Attachable QWERTY

Communication InterfacesCommunication Interfaces:
Expansion InterfacesNon-volatile memory and/or I/O expansion interfaces. For example: microSD, microSDXC, SDHC, CF II., PCMCIA III., etc. No
USBFirst or the only USB port. USB is a common high-speed serial bus standard that allows data and power transfer between the mobile device and another computer. Version of USB identifies USB standard. USB 2.0Released in April 2000, USB 2.0 specification introduced USB Hi-Speed enabling devices to communicate at 480 Mbit/s data rate.
USB HS (480 Mbps)Determines the highest available data transfer speed of first USB port. Usual standard speed levels: High-Speed (HS), Super-Speed (SS)
USB ServicesPossible services: USB power supply, USB charging, USB fast charging, USB host, OTG, etc. USB chargingThe device is able to charge its battery supplied from the USB port. , USB fast chargingFast charging is supported , USB HostUSB host devices are capable of controlling USB client devices, like mass storage devices, mouse, keyboard, camera, printer, scanner, etc. , USB OTG 1.3 , USB PDDevice which meets USB Battery Charging Specification Revision 1.1 / 1.2 is able to supply current from 500 mA to 1.5 A for the client device at 5V. , USB PD 2.0Device which meets USB Power Delivery 2.0 is able to supply current from 3 A to 5 A for the client device at 20V.
USB ConnectorPhysical USB connector layout. Most common types: micro-USB, USB A, USB Type-C or proprietary (e.g. Lightning) USB C reversible
Max. Charging PowerMultiplication of maximal charging current and maximal battery voltage during battery recharging 22.5 W
BluetoothIEEE 802.15 is a short-range radio technology standard that allows transfer of data, and the use of accessories such as wireless audio devices and printers. This field specifies the supported BT version. Bluetooth 5.2Released in Dec, 2019
Wireless LANWireless LAN / WLAN / Wi-Fi: 802.11 defines a medium-range wireless data link that allows for internet access and data transfer. This field enumerates the supported protocols (e.g. 802.11a/b/g/n). 802.11aShort range standard, 5 GHz, max. 54 Mbit/s , 802.11b2.4 GHz (ISM band), max. 11 Mbit/s , 802.11g2.4 GHz (ISM band), max. 54 Mbit/s , 802.11n2.4 GHz (ISM band) or optional 5 GHz support, max. 600 Mbit/s thanks to MIMO antennas , 802.11ac2.4 GHz (ISM band) or optional 5 GHz support (4915...5825 MHz), max. 1300 Mbit/s thanks to MIMO antennas , 802.11axAlso known as Wi-Fi 6. Supports all ISM bands from 1 to 6 GHz. Subtype of Wi-Fi 6E uses 6 GHz carrier frequency
Wireless ServicesPossible extras: Miracast, DLNA, WiFi Tethering, UPnP, WiFi Display, AirPlay, etc. Wi-Fi Direct , Wi-Fi TetheringWi-Fi Mobile Hotsport , WiDiIntel Wireless Display

Multimedia BroadcastMultimedia Broadcast:
FM Radio ReceiverWith a bulit-in FM radio the device is able to receive FM (frequency modulated) broadcast in 79 - 108 MHz band. No

Satellite NavigationSatellite Navigation:

Primary Camera SystemPrimary Camera SystemPrimary camera usually has better imaging capabilities than secondary camera if any
Camera PlacementRefers to the placement of the primary camera on the device. Front, rear or rotatable. Generally rear. Rear
Camera Image SensorRefers to the semiconductor technology of image sensor (FSI CMOS, BSI CMOS, etc.) BSI CMOSBackside Illuminated CMOS (Complementary MOS circuit)
Image Sensor Pixel SizePixel size of the primary camera sensor 1.12 micrometer
Number of effective pixelsA measurement of the maximum pixel number at which the camera can take a picture, often referred to as Megapixels (when horizontal and vertical measurements are multiplied) 13.1 MP camera
Aperture (W)Wide-angle aperture of lens or aperture of lens in case of camera without optical zoom f/1.80
ZoomA feature that changes the focal length of the lens of a camera. Optical zoom requires the lens to move in and out, providing high-quality close ups from a distance 1.0 x optical zoom
FocusCD AF, PD AF, Laser AF, etc. No / Not supported means there is no adjustable optical system or no camera built-in at all PD AFPhase-detection (PD) is a passive autofocus system which measures the phase difference between a two images to reach correct focus.
Video RecordingA measurement of the maximum horizontal and vertical pixel numbers at which the primary camera can capture video 3840x2160 pixel
30 fpsRecording frame rate when recording video at maximum resolution
FlashA flash is used to brighten dark areas when taking photographs; is also used as a flashlight. This field contains the exact type of the flash. single LEDAlso known as mobile light
Camera Extra FunctionsPopular extra features of the primary camera: EIS, EIS for video, OIS, OIS for video, Face detection, 3D photo, HDR photo, HDR video, Macro mode, Panorama Photo, Red-eye reduction, Refocus, Smile detection, Slow motion video, Burst mode, Face Retouch HDR photoHigh dynamic range image recording , Burst mode , Panorama Photo , Face detection , Face tagging , Smile detection , Face retouch , Intelligent scene detection
Aux. Camera Image SensorAuxiliary camera image sensor technology in at least dual lens setup No
Aux. 2 Camera Image SensorAuxiliary 2 camera image sensor technology in at least triple lens setup No
Aux. 3 Camera Image SensorAuxiliary 3 camera image sensor technology in at least quad lens setup No
Aux. 4 Camera Image SensorAuxiliary 4 camera image sensor technology in at least penta lens setup No

Secondary Camera SystemSecondary Camera SystemWidely used for video telephony or taking selfies
Secondary Camera PlacementRefers to the placement of the secondary camera on the device. Front or rear. Generally front camera for selfies or video call. Front
Secondary Camera SensorRefers to the semiconductor technology of sec camera image sensor (FSI CMOS, BSI CMOS, etc.) BSI CMOSBackside Illuminated CMOS (Complementary MOS circuit)
Secondary Camera Number of pixelsA measurement of the maximum pixel number at which the sec. camera can take a picture, often referred to as Megapixels (when horizontal and vertical measurements are multiplied) 8.0 MP sec. cam
Secondary Aperture (W)Wide-angle aperture of lens or aperture of lens in case of secondary camera without optical zoom f/2.20
Secondary Video RecordingA measurement of the maximum horizontal and vertical pixel numbers at which the secondary camera can capture video 1920x1080 pixel
30 fpsRecording frame rate when recording video by the secondary camera at maximum resolution
Secondary Camera Extra FunctionsPopular extra features of the secondary camera: Face detection, HDR photo, Selfie Panorama, Smile detection, Face Retouch / Face Beautification HDR photoHigh dynamic range image recording , Burst mode , Face detection , Face tagging , Smile detection , Face retouch
Sec. Aux. Cam. Image SensorImage sensor technology of sec. auxiliary camera in at least dual lens secondary camera setup No

Built-in SensorsBuilt-in Sensors:
Built-in accelerometerAn internal component that senses acceleration components of the device. Used for automatic screen rotation and for games and applications that rely on acceleration measurement on X, Y, and Z axis. Possible types: 1D, 2D, 3D 3D accelerometer
Additional sensorsBuilt-in ambient (barometer, temperature, altimeter, light, etc.), biometric (fingerprint, HR, step, etc.) and comfort (hall sensor, gesture sensor, proximity, etc.) sensors Hall , L sensorBy measuring the intensity of the ambient light device may control the brightness level of the screen
Ingress Protection:
Protection from solid materialsIngress Protection Standards. IP First digit: Protection from solid objects or materials Yes
Protection from liquidsIngress Protection Standards. IP Second digit: Protection from liquids Yes

Power SupplyPower Supply:
BatteryBattery technology Li-ion polymer (LiPo)
built-inPossible options: removable, built-in
1-cellIn case of high power consumption it is more efficient to connect more than 1 cells in the battery in series to minimize current thus loss.
Nominal Battery CapacityIf there are more than 1 cells in the battery in parellel connection the nominal resulting battery capacity is the sum of capacity of cells 7700 mAh battery
Estimated Battery LifeEstimated always-on battery life of the device in case of common usage conditions 12.0 hours